AH 31 退卸套筒
AH 31退卸套筒可用於在階梯軸的圓柱軸頸上安裝帶圓椎孔的軸承以將圓錐孔軸承安裝在圓形階梯軸上,是比較流行和常用的工業軸套之一。通常,退卸套被壓入軸承內孔中,以通過纖維網或端板將其固定在軸上。對於較大的軸承,當它壓在軸承孔上時,需要更大的力來克服配合面的摩擦。油壓安裝可以通過退卸套簡化此過程。
型號
AHX3120, AHX3122, AHX3124, AHX3126, AHX3128, AHX3130, AH3132, AH3134, AH3136, AH3138, AH3140, AH3144, AH3148, AH3152, AH3156, AH3160, AH3164, AH3168, AH3172, AH3176, AH3180, AH3184, AHX3188, AHX3192, AHX3196, AHX31/500
規格
Withdrawal Sleeves - AH 31
TAPER 1:12
Withdrawal Sleeves NO. | d1 | L | L | b | Thread2) | Appropriate Withdrawal Nut No. | Weight |
---|---|---|---|---|---|---|---|
D1 | |||||||
mm | mm | mm | mm | mm | kg | ||
AHX3120 | 95 | 64 | 68 | 11 | M110*2 | AN22 | 0.65 |
AHX3122 | 105 | 68 | 72 | 11 | M120*2 | AN24 | 0.76 |
AHX3124 | 115 | 75 | 79 | 12 | M130*2 | AN26 | 0.95 |
AHX3126 | 125 | 78 | 82 | 12 | M140*2 | AN28 | 1.08 |
AHX3128 | 135 | 83 | 88 | 14 | M150*2 | AN30 | 1.28 |
AHX3130 | 145 | 96 | 101 | 15 | M165*3 | AN33 | 1.79 |
AH3132 | 150 | 103 | 108 | 16 | M180*3 | AN36 | 3.21 |
AH3134 | 160 | 104 | 109 | 16 | M190*3 | AN38 | 3.4 |
AH3136 | 170 | 116 | 122 | 19 | M200*3 | AN40 | 4.22 |
AH3138 | 180 | 125 | 131 | 20 | Tr210*4 | HN42 | 4.89 |
AH3140 | 190 | 134 | 140 | 21 | Tr220*4 | HN44 | 5.49 |
AH3144 | 200 | 145 | 151 | 23 | Tr240*4 | HN48 | 10.4 |
AH3148 | 220 | 154 | 161 | 25 | Tr260*4 | HN52 | 12 |
AH3152 | 240 | 172 | 179 | 26 | Tr290*4 | HN58 | 16.2 |
AH3156 | 260 | 175 | 183 | 28 | Tr310*5 | HN62 | 17.5 |
AH3160 | 280 | 192 | 200 | 30 | Tr330*5 | HN66 | 20.8 |
AH3164 | 300 | 209 | 217 | 31 | Tr350*5 | HN70 | 24.5 |
AH3168 | 320 | 225 | 234 | 33 | Tr370*5 | HN74 | 29 |
AH3172 | 340 | 229 | 238 | 35 | Tr400*5 | HN80 | 33 |
AH3176 | 360 | 232 | 242 | 36 | Tr420*5 | HN84 | 35.7 |
AH3180 | 380 | 240 | 250 | 38 | Tr440*5 | HN88 | 39.5 |
AH3184 | 400 | 266 | 276 | 40 | Tr460*5 | HN92 | 46.5 |
AHX3188 | 420 | 270 | 281 | 42 | Tr480*5 | HN96 | 49.8 |
AHX3192 | 440 | 285 | 296 | 43 | Tr510*6 | HN102 | 57.9 |
AHX3196 | 460 | 295 | 307 | 45 | Tr530*6 | HN106 | 63.1 |
AHX31/500 | 480 | 313 | 325 | 47 | Tr550*6 | HN110 | 70.9 |
⊚ 尺寸隨退卸套鎖緊而變小.
⊚ M 指的是公制螺紋. Tr代表30° 梯形螺紋;, 數字代表螺紋外徑及螺距.
- 下載